Sunday, October 6, 2013

Katy Explains The Maths Behind The Perfect Zippy Pouch - a 2013 FAL Tutorial

she can quilt

Today, Katy from The Littlest Thistle is going to show us how to make perfect zippered pouches. I have been lucky enough to meet Katy in real life, and she is fun, interesting and generous. Don't be put off when her tutorial starts talking about math - and seemingly complicated math at that - you have all the calculating power you need on your cell phone or computer to lick this bit of math in an instant. And with Katy's help, you will be sewing prettier and technically complicated zippy pouches too. Read on.

Hi I'm Katy from The Littlest Thistle, and I'm here today with a FAL tutorial to help with an oft puzzled over conundrum - how to create a zippy pouch with a flat bottom and vertical sides.



So lets take a look at the 'traditional' zippy pouch, where you squish the sides down to meet the base, sew along a line and chop the extra off:


You can see the sides slope down to meet the base, which is not necessarily a bad thing, it's just that with patterned fabric with any kind of horizontal or vertical pattern you'll lose the effect with things wrapping oddly round the side.  The angle of the sides depends on how far up the seam you go before stitching the line across, and it's not easy to see what the effect will be until the pouch is turned through.

The next option is to cut a square out of the bottom corners of the rectangles you're using to make the sides.  You sew the sides and base together, leaving the square openings free, then you squish the sides down to meet the base again, but this time you have a cut edge to sew along the seam allowance for:


You can see the sides are at less of an angle, but they're still not vertical.

Now I do have to break the news to you that there's maths involved in the ultimate solution, good old Pythagoras and his theorem in fact, sorry!  The good news is, it's easy, and you can do it on the calculator on your computer :oD

Taking the 2nd example from above as a starting point, we're going to use the cut out corners method, but instead of vertical sides on the fabric we start with, we're going to angle it up to the top.  By doing this, when the right angled triangle at the side is folded round and the base is folded up, they will meet to push the front out, leaving the sides vertical.

A right angled triangle is one where the side and the base are at a 90 degree angle to each other, or thinking about a clock face, the big hand (side) is at 12 and the small hand (base) is at 3.  We need a right angle between the side and the base to keep the base flat otherwise you would end up with a rocking pouch!

Because we're using a right angled triangle, to work out how to get the height and the depth we want we need to use Pythagoras:


In the diagram above:

a = the height we want the pouch to be + seam allowance top and bottom
b = half the depth we want the pouch to be (as there is a front and back) + 1/2 seam allowance
c = ?

Pythagoras says:

a2 + b2 = c2

So since I've decided that I want a height of 7 1/2", a depth of 4 1/2" and a seam allowance of 1/2" I get:

a = 7 1/2 + 1/2 + 1/2 = 8 1/2
b = 2 1/4 + 1/4 = 2 1/2

c2 = (8 1/2)2 + (2 1/2)2 = 78 1/2  (that is, c2 = 72.25 + 6.25 = 78.5)

c = √(78 1/2) = 8.86 which we round to the nearest 1/8 inch, making 8 7/8  (8.875)

(** For those who have forgotten a few math things: c2 means c multiplied by c. When you know the value for c2  you then have to take the square root of that value to get c and you can do that by putting the value of c2 into your calculator and hitting the square root button that looks like this:  √. The calculator will tell you the square root and you can check by multiplying that number times itself to see if you get the c2 number you started with.)

Are you still with me?  I hope so...

In the diagram above, there are some unlabelled measurements, so for the depth to work correctly the bit below c must be the same length as b, ie 2 1/2".  The width of the pouch is entirely up to you, but I went for 10".

If you are going to create your pattern using paper and pencil, I suggest you draw the triangle sides on a separate piece of paper with side a vertical and side b horizontal to ensure you have your right angle, then you can connect the 2 and double check that c is correct by measuring it.  Once you're happy that you have all the right measurements, cut them out, and tape them to the main body.  Gridded paper, like graph paper, can be really useful for this kind of thing.

If you want to use a program like Illustrator to create your pattern, as I did, I suggest you also draw your triangle with a vertical and b horizontal, joined by c, then group the lines together and rotate the shape until c is vertical.  Using the grid functions available on most drawing programs should help ensure that your measurements are correct, and that you have managed to get c vertical

Here are a few step by step shots to show you how the construction works:

Front of pouch piece cut out

Having added the zips, I'm now constructing the pouch.  Note that the cut out bits are unstitched

Stitching the corners closed

Finished front on (that left side is vertical, honest!)

Side on shot

This actually allowed me to tick off one of my Q3 finishes, so thanks for helping me out with that Leanne!

And thank you Katy! 

Don't forget to link up your Q3 finishes - the Q3 post-quarter link is open here and it will close at midnight MST, October 7, 2013. And if you still have some UFOs I hope you will join us for Q4 of the FAL, Q4 FAL lists can be posted starting on October 8.

Saturday, October 5, 2013

Anna's Quick and Easy Sewing Machine Cover - a 2013 FAL Tutorial

she can quilt

Today, Anna from Hoot'n'Haller, is sharing her tutorial about how to make a quick and easy sewing machine cover. My sewing machine really needs a cover, I wonder if your's does too. It seems that I am constantly putting off making things for my own sewing room - I might have to fix that this weekend. Anna shows us how simple it is to make this sewing machine cover, read on.

Hi everyone! This is Anna from HootnHaller. I am so excited to share a tutorial today for a quick and easy sewing machine cover. I have been meaning to make a cover for my machine for over a year, but something else always takes precedent. Recently, I have been learning a lot about the maintenance of sewing equipment and now I completely understand the importance of keeping my machine away from added harmful dust! This sewing machine cover is meant to be a super fast project so that you can squeeze it in between your many other sewing projects.

Supplies
Fabric
Flexible ruler
Ribbon (at least 4 feet)
Basic sewing supplies

Instructions
Before you begin your cover you will need to take three measurements of your machine. First, determine the width of your machine.


Second measure from the bottom of the front to the bottom of the back, going over the machine. See the photo below for more clarity.


Third, determine the height for the side ties that will hold the cover onto the machine. I chose to place my ties 7" from the table.


The measurements for my machine were 18.5" x 30". The next step is to make a "quilt top" that meets the measurements you took for your machine. You can make your sewing machine cover with elaborate patchwork or even choose to use the whole cloth method. Since my sewing machine is set up in my bedroom, I chose to create a simple patchwork top that would fit in well.


Next, cut a piece of fabric to the same dimensions as your top. This side will most likely face the inside of your machine - though you could definitely make your machine cover reversible! Layer the top and backing right sides together.


Cut your ribbon into four sections, each at least 12" long. Go back and double check the measurement you took earlier for the placement of the ties. Use a ruler to measure your determined distance from the end of the cover. Place the ribbon in between the two layers and pin in place. You will do this four times - twice on each of the long sides of your machine cover.


Place pins around the perimeter of your machine cover. Mark a 3-4" section at one of the ends where you will not sew. This gap will be used to turn your cover right sides out. Sew a quarter inch seam around the perimeter.


Clip the corners to eliminate bulk from the seam allowance. Now, turn your project right sides out! Use a blunt object object, such as a pen, to push the corners out. Give your project a good press, make sure that the seams are pushed out and even.


Topstitch around the edges of your cover using a one-eighth inseam allowance. You will probably want to pin the turning hole shut to ensure that you stitch through both layers. Once you have finished the top stitching you have a completed sewing machine cover. Tie it onto your machine and enjoy!


I hope that you liked this tutorial and that you will cover up your machine to keep it safe from dust!


And thank you Anna! 

Don't forget to link up your Q3 finishes - the Q3 post-quarter link is open here and it will close at midnight MST, October 7, 2013. And if you still have some UFOs I hope you will join us for Q4 of the FAL, Q4 FAL lists can be posted starting on October 8.

Friday, October 4, 2013

Debbie's Special Occasion Clutch : a 2013 FAL Tutorial

she can quilt

Today, Debbie from A Quilter's Table, is sharing her tutorial about how to make a special occasion clutch. Debbie is a constant source of inspiration to me - she makes the most beautiful quilts and things - and she has become a good friend who I have yet to actually meet in person. She sure makes this sophisticated clutch seem easy to make, I am going to have to give it a try. I bet you will want to make one too, read on.

Hi there! I'm Debbie from A Quilter's Table, where I share my journey of quilting as well as my love of the Table. I've participated in the Finish-A-Long for nearly two years, and it has been a great motivator for me as well as being a whole lot of fun! When Leanne asked if I could share a tutorial this week, I was pleased to do so!

Although I consider myself primarily a quilter, I also love to make what I call "littles" . . . smaller projects where I can try out techniques, play with beautiful fabrics, yet still have a quick satisfying finish. So when my son got married last summer and I decided I needed a mother-of-the-groom clutch to carry at the wedding, it wasn't much of a stretch for me to make it myself.


Rather than spend time piecing a more complicated exterior, I chose to embellish some Essex linen with quilting. Here's how easy it is to whip up a Special Occasion Clutch for yourself!

Of course you need supplies. I like to keep both of these on hand in my studio:
~ a 8 x 3" purse frame
~ Gutermann Creativ Glue
(I get mine from WhileBabyNaps.)


Use the template {here} to cut out 2 each: exterior fabric, lining fabric, and fusible batt.


Fuse the batting to the back of both of your exterior pieces. With your hera or other making tool, mark several random, curving lines across the front of your clutch exterior.


Put on your walking foot and quilt on your marked lines first. From there, I suggest just going for it - there's no wrong way from here. Just quilt what you feel, even switching threads once or more to add some variety. (Of course, if it makes you more confident, feel free to mark as many of the lines as you wish!)



With the quilting done, it's time to construct your clutch. Using your pattern as a guide, mark on the backside of fabric where your frame hinge will hit the edge. Do this for your exterior pieces as well as the lining.


Pin the two exterior pieces, right-side together, and stitch from one mark, down along the bottom, and up to the mark on the other side, securing threads well at beginning and end. Repeat for lining EXCEPT leave an opening 2 1/2-3" wide along the bottom of the lining.


Turn exterior right-side out and carefully slip into the lining, which is still wrong-side out.


Nestle in until the side and top edges line up. Align sides were stitching ends and pin on both sides. Pin along upper sides and top edge. Note that you are pinning one lining piece and one exterior piece together. Stitch from one side pin, up along the top and down the other side to the other pin, securing threads at beginning and end. Repeat for other side.


You're almost done! Turn the entire clutch right-side out, pulling through the hole left in the bottom of the lining. Before tucking the lining into the clutch, fold 1/4" in along the hole in the bottom of the lining - I find it helps to press lightly with my iron - then pin and stitch opening closed, either by hand or machine.


Now tuck the lining into the pouch, pushing down into the corners, and smoothing along upper edges. Press entire clutch well.


I like the added touch of stitching very close along the upper edges of the clutch. This stitching will not show, as it will be tucked into your frame, but it makes the insertion so much easier.


Now for the frame! Run a bead of glue into the frame channel, from one hinge, all along one half of the frame to the hinge on the opposite side. Carefully insert one side of your clutch, starting with the corners, then finish tucking in along the top edge and the sides. It all works quite easily! Let clutch set on your work table for 15 minutes or so to let the glue begin to set.


Repeat to glue the remaining side and let clutch dry for an hour or so.


And you are done!! I hope you enjoy making a Special Occasion Clutch of your own!


(If you make a clutch, feel free to post it in the Quilting with A Quilter's Table flickr group!)

And thank you Debbie! 

Don't forget to link up your Q3 finishes - the Q3 post-quarter link is open here and it will close at midnight MST, October 7, 2013. And if you still have some UFOs I hope you will join us for Q4 of the FAL, Q4 FAL lists can be posted starting on October 8.

Thursday, October 3, 2013

Thank you to our Q3 FAL Sponsors!

she can quilt

Today I want to thank the Q3 Finish-A-Long sponsors. One of the lovely parts of the on-line quilting community is the generosity of the on-line quilting retailers who are willing and able to support on-line events like the FAL with prizes.

First I will remind you that each finish you link from your Q3 list becomes an entry into the randomly chosen draw for each of the following prizes, so get your finishes linked up before midnight October 7. If you are almost done one last finish for Q3, these prizes might give you just that extra incentive to finish it off.

Here are our wonderful Q3 sponsors:








Quilter in The Gap
Surprise Package from Rhonda at Quilter in the Gap

 
£25 Gift Certificate from Tikki London




Texty Fabric Bundle from Sew me a Song


There are some things I wanted to share about these sponsors:


  • I have shopped at all of these shops (yup, I am an experienced shopper) and each of them is lovely to deal with - they have excellent products and customer service.
  • All of them are happy to ship to me in Canada and to you wherever you are.
  • Each of them would love you to take a few minutes to visit their on-line shops (just click the buttons above) and take a look around. While you are there, please consider taking a minute to send them an email thanking them for their support of the FAL.

And get your Q4 lists ready, as I am so pleased to report that each and every one of these sponsors has generously agreed to be here supporting us for Q4 too - and I even have a couple more sponsors to add to our list for the beginning of Q4. (If you would also like to sponsor Q4 of the FAL, please email me at shecanquilt [at] gmail [dot]com.)

One more time, here is the upcoming FAL schedule:
  • October 1 - 7 -  Q3 tutorials will run on this blog.
  • October 7 -     The Q3 post quarter link up closes at midnight, MST.
  • October 8 -     The Q4 pre-quarter link up opens - please post your Q4 list.
  • October 15 -    The Q4 pre-quarter link closes at midnight, MST.  
  • January 1 -      The Q4 post-quarter link opens.
  • January 8 -     The Q4 post quarter link closes.
  • January 9 -     The 2014 Finish-A-Long begins, with a great new host! (I'll tell you who soon.)
Go here to link up your Q3 finishes, I will be checking them all (every single one - I love seeing all your finishes) out and commenting when I can. Do take a minute to visit some of the other finishes, and remember to leave a comment or two as well, we all love comments.

There are more tutorials for Friday, Saturday and Sunday - I sure love the tutorial week of the FAL, I hope you do too.

Best,


Leanne