Monday, October 3, 2016

A 2016 FAL Tutorial: Simply Tote Bag with French Seams or Lined



{This tutorial was originally published a few years ago as part of Sarah's {Sew} Get Started series.}

In this tutorial I am going to teach you to make a simple tote bag that is sturdy and easy to carry, but does not have to use up a lot of fabric or time. I am going to show you both an unlined and a lined version.

Unlined Tote Bag – special trick: French Seams

The problem with an unlined tote bag is that the seams are not strong and worse, you can see them and  they fray in an annoying manner. The solution is to use French seams. For future reference, you can use these kinds of seams whenever your project includes an exposed seam that you want to be stronger and tidier.

Materials:

-  2 pieces of fabric which are 15” x 15” (or any size you like) for the front and back of the bag. The bag, using my measurements, will finish to be about 13” wide by 13.5” high. The seams use up about 1” on each side and the bottom and we turn under about 0.5” at the top of the bag.

- 2 pieces of fabric which are 6” wide x at least 22” long or the length that you would like the handles, keeping in mind that we will use up about 2” at each end of the handles attaching them to the bag.

Notes:  Fabric: These bags can be made of almost any kind of fabric. For the unlined bags in the pictures, I used a cotton/linen blend fabric. You could also use 100% cotton, canvas, linen, corduroy, denim, etc. For the lined bag I used 100% cotton for the front and for the lining, but again you can use whatever fabrics you like. Do remember that light weight fabrics will not make a very strong bag, so consider you planned use as you make your fabric choices.

     Backstitching: When making a tote bag it is best to backstitch at the beginning and end of every seam. To back stitch, you start sewing the seam for 3-5 stitches, stop, sew backwards over the same 3-5 stitches and then go forward again to finish your entire seam. At the end of the seam, you sew to the end, then sew backwards 3-5 stitches. When you sew on top of the main stitch line you secure the seam from unraveling.

Let's get started (the explanation follows each photo):


1.     Place the front and back pieces of the bag wrong sides together. Pay attention to the orientation of any pictures or designs on the fabrics so that you know which end is the bottom. Pin the wrong sides together, right sides facing out, across the bottom.

2.     Sew a ¼” seam across the bottom edge.

3.     Press open the seam. French seams are far nicer if you take the time to iron as you go.

4.     Fold the pieces so that the right sides are together encasing the raw edges of your seam. Pin (You can see that I forgot to pin in my pictures but it is easier if you pin).

5.     Sew a ½” seam along the bottom edge, with right sides together. You will encase your first seam. When you are done, open and press the seam.

6.     Fold the edges that are at the top of the bag under ¼” and press. Fold under a second time about ¼ - ½“ and press.
mosaicb03c0e94095de450a605b1769499153a47f6a100
7.     Topstitch all the way across the folded edge close to the edge of the fold closest to the bag side. Take your time so that this folded part is well secured. Go back and stitch another line if you missed any parts or if you like the look of two stitch lines.

8.     Arrange the front and back so that wrong sides are facing and the top edges line up nicely. Pin. Sew a ¼” seam along both sides.

9.     Turn the bag so that the right sides are together. Use a pointy tool (or pencil, knitting needle, screwdriver, etc.) to ensure the corners are fully turned. Press and make sure that the bottom seam lays so that it is facing in the same direction at both ends. Pin the side seams.

10.    Sew the side seams with a ½” seam. Catch the bottom seam in the side seams as shown. Don't let that picture confuse you, in it the top is on the right and the bottom on the left.

11.    Turn the bag right side out and press. The bag part is finished.
mosaicd1ee67a2d0c58c8c8733bf5fa6feff6a2f6dc2eb
12.    Take the handle pieces and fold in half lengthwise with wrong sides together. Press the seam. Open the seam and fold one side so that the raw edge meets the pressed middle fold. Press and repeat on the other side. Then, keeping the folded sides in place, fold in half along the original fold. The result is that both raw edges are folded into the middle and the edges will be encased in the handle. The resulting handle will be about 1.5” wide.

Sew the handle together with a ¼” seam along the folded end, and then repeat on the other side. Sew two more stitching lines down the middle of the handle. Thicker handles which are well stitched do not bunch up in your hands and do not hurt your hands when the bag is heavy in the same way that thinner handles do. Instead, they keep their shapes when the bag is full and heavy, making it far more comfortable to use.

13.    Fold up each of the four ends of the two handles about ½” and stitch. These will be hard to sew because it is so thick, and it is easier to start about ¼” from the edge.

14.    Place the bag body on the table and measure 2” in from the edge and 1.5” down from the top. Place and pin the handle end here with the folded edge facing the bag front.

15.    Place the bag front and pinned handle under your sewing needle, being careful not to catch the other side of the bag. You are going to sew a square and then an X to secure the handle on the bag. For the square, sew from the top edge toward the bag bottom, close to the handle edge, stopping about ¼” from the end of the handle. Place the needle down, lift the presser foot and pivot the bag and handle 90 degrees so you can sew along the next (bottom) edge of the handle. Again stop when you are ¼” from the edge, place the need down and pivot again. Sew up the handle edge toward the top of the bag. Stop ¼” from the end, needle down, pivot and sew across the top of the bag to where you started. You will have completed a square. Place the needle down. 

16.    To make the X, pivot the bag and handle so that you are now sewing to the opposite bottom corner of the handle and sew across. Stop at the corner, needle down. Pivot and sew another line along the bottom of the handle to the opposite corner. Stop at the corner, needle down. Pivot again to aim at the opposite top corner. Sew to it (back stitch) and cut the thread. You handle is secured.



17.    Repeat the placement and sewing for the other end of the handle and for both ends of the second handle. Be careful to check that the handles are not twisted before you sew the second side down.

18.    Press the bag, and head off for some shopping. You are all done!

Lined tote bag - provides options for decorative outer panels

The advantage of lining the bag is that then the front and back outside panels can be far more decorative. The raw seams that are created to make the outside panels will be encased by the lining so they will not unravel and cannot be seen.

I am going to give you the directions to make a simple patchwork outside. You can also make the bag front and back using any other kind of technique to decorate your bag. You could use a left over quilt block, embroider a picture, add an applique design or you could just use plain pieces of fabric. Since we are adding a lining, it is not necessary to use French seams because the lining will hide and protect the raw edges of any seams. The lining also adds strength to the bag.

Materials

- 18 charm squares which are 5" pre-cut squares of fabric, I've used some from Sherbet Pips, a line of fabric designed by Aneela Hoey, but you could use any fabrics or cut your own squares from fabric on hand. Or you can use two pieces of fabric that are 14” x 14” for the outside of the bag.

- 2 pieces of lining fabric that are 13.75” x 13.75” (I make the lining 1/4" to 1/2" smaller than the outer panels to avoid having excess lining which bunches up.)

- 2 pieces of fabric that are 6” x at least 22” (or longer) for the handles

As you will see, the bag assembly is different but the handle part is identical to the unlined bag.



1.      Arrange the charm squares as you wish in a nine patch, which is three squares high and three squares wide. 

2.      Sew each row together using ¼” seams (remember to back stitch). Press the seams to one side for one row and the other side for the next row.

3.      Pin one row to the one above it, nestling the seams so that they match up nicely. Sew the row and then repeat for the other row. Repeat for the other side of the bag. Press the seams and the entire front and back panels.

4.     Place the right sides of the front and back of the bag together and sew down one side, across the bottom and back up the other side. Leave the top open.

5.     Stitch the lining together, leaving a turning hole at the bottom – Stitch down one side and across about 1/3 of the bottom. Backstitch and cut your thread. Leave about 4” and start stitching again, backstitch, and then sew to the top of the lining. Clip the corners diagonally to reduce bulk but be careful not to cut your stitches. Turn the outside panels and the lining panels so that they are right sides facing out and press.

6.     Turn the outside panels so that the right sides are facing each other and make sure that the lining panels are still right sides facing out. Place the lining panel inside the outside panels so that the right side of the lining panels are facing the right side of the bag panels. Match up the side seams and pin.

7.     Stitch the lining and the outside panels together with a ¼” seam by starting at one spot and stitching all the way around until you meet the start of your stitching.

8.     Turn the bag right side out by reaching into the hole in the lining bottom and pull the bag through it. 

9.     Press the bottom of the lining so that the raw edges at the hole are turned in about ¼” and then sew along the opening in the lining  to close it.

10.    Push the lining into the bag and then press the top edge. Topstitch around the top of the bag ¼” from the edge, and do a second line of topstitching if you like. The main part of the bag is finished.


11.    Follow steps 12 – 18 set out above for making and attaching the handles. Your bag will then be finished and ready to use.




I hope you have enjoyed this tutorial and that you will make plenty of tote bags. Once you have worked through these steps a time or two you will be able to make a tote bag in no time at all.

These bags are great to replace the plastic ones that the grocery store uses, to carry your shoes or books to school or work, for lunches, for shopping or anything that needs a bag. You can make these larger or smaller, and rectangular (good for a wine bottle or a yoga bag). If you are going to make a much larger bag that will be heavier when full, consider widening the handles to protect your hands. Also, if you want to be able to sling the bag over your shoulder, measure a favourite purse and use that length for you handles.

If you have any questions, please let me know.


2016 button 250 best

Don't forget to link up your Q3 2016 FAL finishes before 11 pm CDT on October 7 - go here, and also to check out the other FAL tutorials this week. Here is the schedule:

Best,

Leanne

    Friday, September 30, 2016

    FAL Q3 - Time to link up your finishes!

    2016 button 250 best

    Here we are at the end of another quarter....Q3 of the 2016 FAL! The 2016 FAL is now global - a community of bloggers across the world are jointly hosting the FAL. Our hosts are:
    It's time to link up the projects on your 2016 Q3 FAL list that you finished. First, a huge thank you to our fantastic sponsors:



    For the 2016 FAL, we also will feature a tutorial week. Here is the schedule so you can visit them all: 



    The 2016 Q3 link for your finishes is now open below on my blog and on each of the hosting blogs - you only need to link on one blog for your finish to appear on each blog. Link-up "rules":
    • Add one link for each finish. If you want to link a round up post of all your finishes, use that link to enter one of your finishes and then link the rest of your finishes separately. Please, only one link per finish, as your link is an entry into the randomly drawn prize draws.
    • Please use the 2016 FAL button or the hashtag #2016FAL
    • Please ensure that the photo or blog post you link up contains a link or reference back to your original list so that we can verify your entry (make sure it is from the appropriate quarter)
    • Please become part of the FAL community. Please check out the links of others and comment. We all need encouragement so let's applaud each other. The 2016 FAL Facebook page is here and follow us on Instagram @finishlong and tag your photos #2016fal and #falq2yourname (substitute your name - this makes it easier for us to match your finishes with your lists. 
    • Our hosts will also link their finishes to share in the community, but they are not eligible for any of the prizes.

    The Q3 Finishes link will stay open from now thru October 7, 2016 - link up your finishes early and if you have a last minute one, add that one later so you don't miss out. The prizes will be awarded as soon as we can verify all the entries and do the drawings. We will post the winners on each hosts' blog.

    Start making your Q4 FAL lists as the Q4 list link opens on October 8.

    I'm looking forward to seeing all of your finishes. I have some this quarter too, I will be sharing them this week.

    Best,

    Leanne


    Tuesday, September 20, 2016

    Scraptastic Tuesday - September Winners!


    Before I award the September Scraptastic Tuesday prizes I have the start of a new project.

    playing with improv circles

    I don't much scrappy work to share today but I did start playing with some scrappy improv circles. I think I might make a bunch more.

    It is interesting because I see these as scrappy because they are different colours and I can use some of my solid scraps when making them. But since this block is about 20" square, I am mostly using large chunks cut from large 1 yard or more pieces of solids which were purchased for making large improv solid stuff. So are they scrappy? I still think so.

    Before we award the prizes, first, our fantastic sponsors:


    A huge thank you to our generous sponsors for providing the following prizes which have been awarded randomly among those of you who linked up as follows:
    If you are a winner, congratulations, and watch for an email from me today or tomorrow to get you connected to your prize.

    Please join Nicky from Mrs. Sew and Sow and I next month to link up your scrappy project or thoughts on taming your scrap mountain on the second Tuesday - October 11, 2016.


    And if you are looking for some scrappy inspiration, visit the September links, they are awesome.
    Best,

    Leanne

    Tuesday, September 13, 2016

    Scraptastic Tuesday - the September link is open


    It's the second Tuesday of September, and the Scraptastic Tuesday monthly link is open.

    First, I am going to share a bit of the behind the scenes from making Rainbow Breeze, the quilt using the Fat Quarter Shop Summer Breeze Pattern that I shared last week. If you watch the short video, you will see that the instructions for the quilt create a lot of scraps.

    Cutting fabrics

    This pattern's clever approach to the traditional kaleidoscope pattern also is designed to use fat quarters. Following the cutting instructions will mean you use up the entire fat quarter of each piece with the exception of a left over strip of about 2".  When you cut the triangles from the pieced strips, the pattern does not encourage you to cut two extra triangles in the spaces. But there is more than sufficient fabric to do that, so that is what I did. I figured that out by measuring the first cut and when that seemed fine, I made the first cuts and it worked out, so I carried on.

    You can see those left over triangles in the background. I have been playing with them and soon will figure out a way to use them. Since I really do not enjoy cutting all the fabric for a quilt before I get started, knowing that I would have all these left over useful triangles for another quilt make it so much easier.

    Using the scraps

    The pattern uses a single block which you trim with the 8.5" ruler. This makes the blocks less fussy than the method I used for my last kaleidoscope quilt but it also means that you have a lot of little scrappy bits. After consulting all of you, I decided to keep those little bits so I have been playing with them. They come together, for me, as sort of stretched out rosettes.

    Scrappy rosettes?

    I lowered my ironing board and pieced, trimmed, and ironed as I went. Now I just need to decide how to use these. With some background or mushed together or maybe strung along into a long row or a border? Then, for a quilt or maybe just a pillow? I have to say that these little scraps are fun to play with for a while and then I get tired of them. So I am keeping them handy for a sort of leader or ender type project, or when I just have a few minutes to sew.

    By the way, if you have not been following Nicky's 2016 Scraptastic Sampler, you should. I am hoping to make one too, I love all the stars.

    So, now is the part where you share your scrappy projects, plans and ideas. First, our fantastic sponsors:


    A huge thank you to our generous sponsors for providing the following prizes which will be awarded randomly among those of you who link up.
    • Massdrop - Fabric Bundle to be announced

          Please join Nicky from Mrs. Sew and Sow and I by linking up a blog post or flickr or instagram photo sharing a scrappy project, in progress or finished, or your thoughts on dealing with your scrap mountain:
          • You don't have to have joined us before, everyone is welcome.
          • One link per person, and it will be your entry into the random draw for the prizes. It is the same link up here and at Nicky's blog - Mrs. Sew and Sow - so you only need to link up on one of our blogs.
          • This link is to share with our community about using your scraps, please don't use it to advertise your own products or events.
          • You can link up from your blog, instagram or flickr, but you have to link up to be entered in the prize draw.
          • Please visit at least a few of the links, they are very inspiring, and leave comments too as everyone loves to connect. 
          • Use the Scraptastic Tuesday button and invite your friends to join us too. Please share our button, or a link or the hashtag #scraptastictuesday in your linked post or photo. 
          • The link is open until next Monday night at 10:00 pm MST. We will announce the winners next Tuesday. 
          • If you have trouble linking up, let me or Nicky know and we will get you sorted.
          Best,

          Leanne