Wednesday, October 2, 2013

Karen's Giant x and + Block - a 2013 FAL Tutorial

she can quilt

Today, Karen from CapitolaQuilter, is sharing her tutorial about how to make giant x and + blocks. I am sure you have all seen these blocks and the wonderful resulting quilts around the internet. Karen's tutorial walks us through the details of making these popular blocks in super size and she includes directions for making a bunch of bonus HSTs too. I can't wait to give these a try, I bet you will want to too. Read on.


Giant x and + Block


 This Tutorial variation was inspired by:
 Amy/badskirt 8" 
which she credits inspiration to Setsuko Inagawa's quilt and original block attributed to Nancy Cabot. 

Me & My Mixed Scale xPlus Top


12.5" blocks Mixed with 24" blocks

A few weeks ago my picture caught a lot of attention on flickr and comments on a recent blog post so when Leanne at  She Can Quilt invited me to be part of the FAL Q3 Guest Tutorials, it was perfect timing.  I've only written a tutorial twice before;  Polaroids and Tassels and have never been a guest blogger - so if all of this seems a bit rough around the edges you'll know why!
Thanks for having me, Karen

24" Block Cut List:


Plus Center  = Two 4.5"x 4.5"and One 4.5"x12.5"
Plus End Tabs = Two 6.5"x 4.5" and Two 4.5"x6.5" (or Four 4.5"x 6.5 if non-directional)
Background = Eight 6.5"x6.5"
X = Four different fabrics, each 10.5"x10.5" (fussy and non-fussy instructions given below), all seams 1/4, all seams ironed open.

the FABRIC Grouping


Audition and Decide on Fabric Placement

The look of the block varies greatly based on your choices, so have fun deciding what goes where!

Another Fabric Grouping Sample

Take a picture for reference later, especially if you are chain sewing several blocks at the same time. 

the PLUS


Plus Center

Cut Two 4.5"x 4.5" and One 12.5"x4.5" for the Plus from the same fabric.
Above you can see a fussy and a non-fussy version.

Plus Ends

Cut Two 4.5"x6.5" and Two 6.5"x4.5" for the Plus End Tabs of the same fabric if your fabric is directional like the sample below. Later, you'll also need to pay attention to orientation during assembly OR you can cut Four 4.5"x6.5 of non-directional fabric stacked like the picture above.


 the FUSSY X


Using a 12.5" square ruler, cut a visual guide out of tracing paper 5.5" wide. Draw a line down the center.  Place it on the mat using the 45 degree line & vertical reference (see arrows). Cut one tip.

Cut the First Guide Tip

Reposition the ruler on the tracing paper at the 10.5" line shown below with red arrows and at the center line on the guide shown below with a green circle. Cut the second tip.  
Remember that this is not a cutting template, but rather a visual guide for the X portion of the block. 

Cut the Second Guide Tip

Mark the center of the guide and tape it to your ruler. Play around with the fabric pattern repeats until you find what you like. Because the block is Jumbo, you can highlight special larger scale prints.


Cut the two sides where your tracing paper is at the ruler edge, shown at the top of the photo above.


Reposition the ruler and cut the other two sides to get a  fussy 10.5"x 10.5" square.

the NON-Fussy X option



Cut a stack of 10.5" squares. I prefer the look of mixing fussy and non fussy x segments together.

 the BACKGROUND



Cut Eight 6.5"x6.5" Background.  For a high contrast, pick something that is similar to your Plus Center fabric and different from your X and Plus Ends fabric since they will touch.


Draw a line down the center of the wrong side of the background squares tip to tip and another 1/2" from it on the outer side only.   These will be your STITCH lines. 

Align the background squares with the edge of the x square and put one pin where they overlap and one pin near each outer point to help keep things in place. 


Chain piece all of the center lines on one side, then the center lines on the other side. 
Do the same for the outer lines. Easy as 1, 2, 3, 4.

The bonus half square triangle are well worth the second pass because they're so large. 


Cut 1/4" from the center line right between the two stitch lines.

Here are the X parts once the background bonus half square triangles have been trimmed off. 
Press seams open being careful not to stretch or distort the square because they are now on the bias.


Close Up on one fussy cut X segment:


the ASSEMBLY


Sew a 6.5"x4.5" Plus End to the left and right of the Plus Center 4.5"x12.5".  
Sew a 4.5"x6.5" Plus End to the Plus Center 4.5"4.5" and repeat to make two.


Refer to the numbers and picture above, pressing open seams between each step: Sew an x segment to each side of the vertical Plus,  repeat to make two. Sew the horizontal seams #3 & #4 and you're done!


During the final assembly steps I pin the ends and along the joints but I don't stress about perfect joints.

the BONUS HSTs



Measuring just shy of 6", these are totally usable parts for another project and you get eight from each block with little extra effort.  I will probably clean up them to 5.5" before sewing them together. 

the SAMPLES 


Sample of a lower contrast background.

Sample of using all very similar X and Plus Ends

Four 12.5" blocks sewn together join nicely to the 24" blocks. 

Another shot of my Mixed Scale xPlus Top

And thank you Karen! 

Don't forget to link up your Q3 finishes - the Q3 post-quarter link is open here and it will close at midnight MST, October 7, 2013. And if you still have some UFOs I hope you will join us for Q4 of the FAL, Q4 FAL lists can be posted starting on October 8.

Tuesday, October 1, 2013

Elizabeth's Easy Y-seams - a 2013 FAL Tutorial

she can quilt

Today's tutorial is from the talented Elizabeth, who blogs at Ocassional Piece - Quilt. Elizabeth is an experienced quilter with a degree in Clothing and Textiles. Elizabeth has put this excellent tutorial together to demystify the legendary "Y-seam" for us. Soon you will be sewing y-seams without even a blink, read on.



Hi!  I'm Elizabeth and I blog at OccasionalPiece-Quilt, or OPQuilt, for short.  I've been sewing and quilting for more years than I should admit to, and during that time have completed over 120 quilts.  So I've faced down more than my share of the Dreaded Y-seams.


In June of this year, I made this quilt for my sister, titled Christine's Philadelphia.  As you can see there are lots of peaks and valleys in this thing--lots of Y-seams going both ways (some people call them Y-seams and V-seams) but really, let's keep it simple.


They are called Y-seams because the V-part of the letter Y usually has fabric with no seam, and the tail of the Y has a seam. I've marked the Y for you in red in the picture on the left.  The picture on the right is the other type of Y-seam.  I'll show you both.


Let's start with the first type of Y-seam, where the "tail" of the Y is facing toward you and the "V" of the Y is underneath.  Place a pin at the 1/4-inch mark through the seam, and into a spot that would be the peak of the 1/4" seamline, if you could draw it on and imagine it. 


Most beginners want to pin that seam to death.  That makes me want to run screaming in the other direction.  The success of your Y-seam depends on the "float" of the fabric.


I sometimes will place one pin on either side of the seam, just to anchor it as I get going, then another pin or two along the starting point.  Then I take out the (above) pin.  Again, I want my fabric to float -- don't want to anchor that second half of the seam too much, as I need it to pivot.


Start sewing from the left edge, as the seam faces you, using a 1/4" seam allowance. Fold the seam toward you, and as you approach the seam, slow down and use a bit smaller stitch.  You are trying to anchor the stitching a bit.


When you get to the seamline, when you are on top of the thread marking that other seam, STOP.  Make a tiny stitch on top of the one before to anchor, but DON'T GO OVER THE SEAM LINE.


Lift your needle out of the cloth.  I pulled it away to show you what I mean, but you don't need to do that.  Just give yourself a little room to smooth the (green) seam allowances out of the way, and to find the place to insert your needle again. 


Re-insert your needle just on the other side.  Then line up the next two raw edges, smoothing the fabric away from the needle and your presser foot.  Sounds more confusing than it is.  Take a few tiny stitches to anchor, then change your stitch length back to normal.


 Another shot of my needle placed just on the other side of the seam allowances (which I flipped to the back of my presser foot).


Depending on the amount of cloth in your Y-seam, and if you just feel better about it, go ahead now, and pin those raw edges together and stitch the rest of the seam.


When you are through sewing, clip the thread if it is restricting the ability of the seam allowance to open up and lay flat.  If you left a bit of thread there (pulled it away from the needle as in my photo above) there should be no problem. 


Press, keeping the tail of the Y-seam open.


 From the front, it looks like this.

Now we'll tackle the other kind of seam--where the seam of the Y's tail is underneath, and you see the "V" part of the Y.


First locate the valley of the one-quarter-inch seamline and put a pin there.


Snip to within a couple of threads of the pin.  Leaving the pin there insures that you won't cut too far.  If that happens, curse a little.  You can sometime rescue the piece with a bit of fusible interfacing.  Better to not cut too far.  Half of the seam (1/8") is all that's needed.


Find the 1/4-inch peak of the seam below, and poke the pin in to anchor.  You can leave in that center pin to hold it, and if you are afraid it will slip, it's okay to put one pin on the backside.  If you can, try to avoid that pin on the right.  Again, the success of a Y-seam lays in the ability of the fabric to move and pivot.


Just as in the first type of seam, start stitching from the left side of the seam, towards that center pin.


When you get to the pin, STOP with your needle down in the fabric.  Remove the pin, then pivot the fabric so that you can match raw edges.  As you align the new sides, it may feel a bit bulky under your foot, but smooth any excess fabric out away from you.


Here you can see that I've pivoted, repinned the new raw edges together and am starting down the other side of the seam.



This is what it looks like from the back. That deep fold is the V part of the Y-seam.


The front.  Give it light press.  Resist the urge to saturate it with your pressing goo and mash it flat with your iron.  A shot of steam and firm pressure with your fingers can usually help the most reluctant point to behave.


Sometimes your seam gets a little jig-jaggy.  As long as it's not too bad, it will be fine.  I did the same kind of stitching process on this seam: shorten your stitches as you approach the point, then lengthen them out on the other side.


A better point.  All of these work fine in the quilt, because you haven't, a) stitched it to death, and b) murdered it with your iron. 


You can see one type of Y-seam where I joined the green roofs to the yellow houses.  And you can see the other type where I joined the purple roofs to the sky.

Now you know all my dressmaker/quilter tricks: never be afraid of Y-seams again!


Thanks to Leanne, of She Can Quilt, for hosting this series of guest tutorials for the Finish-A-Long Motivational Program.  (Just kidding on the name of it, but it does help get those UFOs out of the closet and onto the bed.  Or wall.)

And thank you Elizabeth! 

Don't forget to link up your Q3 finishes - the Q3 post-quarter link is open here and it will close at midnight MST, October 7, 2013. And if you still have some UFOs I hope you will join us for Q4 of the FAL, Q4 FAL lists can be posted starting on October 8.

Monday, September 30, 2013

It's time to link up your Q3 Finish-A-Long Finishes.

she can quilt

It's the end of Q3 of the Finish-A-Long, can you believe it? I have two finishes this quarter out of the six projects on my list (my original Q3 list is here):

1. Octagonal Orb quilt for Siblings Together: Done and donated. Ta Da post is here.

Octagonal Orb, ready to gift

2. Grannie square quilt - Done and in use, this is my quilt for cuddling, reading, naps, etc. Ta Da post is here.

Granny Squares - Done

So two out of six is not bad, and I am going to have to put some thought into my Q4 list so that I can finish the year on a high note.

Now it is time for you to link up your Q3 finishes. Remember that each finish is an entry into the randomly chosen draws for the prizes from our wonderful Q3 sponsors.

Here are some answers to your questions (the rules are also here):

How do I link up my finishes? Do I need one link for each finish?
  • Please link one blog post or flickr picture for each finished item that you had listed on your Q3 FAL list which you linked up in July. You can link older blog posts or do new ones, as you like. In one or all of the posts or pictures you link up, please include a link to the Q3 list you linked up in July so I can check your entries.
  • Feel free to do a post about how you did this quarter and link it for one of your finishes and then link up the rest of your finishes separately. Don't add an extra link just for the wrap up post please.
  • Please visit some or all of the other links and leave comments, everyone likes comments.

Is there a penalty for not finishing something on my list?
  • No, but please join us for Q4.

Do things I finish in the first week of October count?
  • Yes, anything from your Q3 list that is linked by October 7 counts.

What if I have no Q3 finishes?
  • Leave a comment on this post, post about it on your blog or in the flickr group, but don't link up.
  • Join us for Q4 - put those projects on your Q4 list and let's get them done.

What is the schedule?
  • October 1 - 7 - Q3 tutorials will run on this blog.
  • October 7 -     the Q3 post quarter link up closes at midnight, MST.
  • October 8 -     The Q4 pre-quarter link up opens - please post your Q4 list.
  • October 15 -    The Q4 pre-quarter link closes at midnight, MST.  
  • January 1 -      The Q4 post-quarter link opens.
  • January 8 -     The Q4 post quarter link closes.
  • January 9 -     The 2014 Finish - A - Long begins, with a great new host! (I'll tell you who soon.)
she can quilt

The Q3 post quarter link is open until midnight MST October 7 - don't be late. You must link your finishes by then for them to count in the draw for the wonderful prizes from our generous and wonderful sponsors - each separately linked finish is one entry in the random draws. If you are trying to squeeze one last finish in you can link the rest of your finishes now and that last one at the 11th hour - just saying.

I can't wait to see how many beautiful projects you have finished and gotten out of your sewing rooms this quarter. Oh, and you can start getting together your Q4 lists. Don't forget, we have great tutorials coming this week, in between the link ups - it is going to be a fun.

If you have any questions, or get stuck linking up, let me know and I will help you out. You can leave a comment or email me at shecanquilt [at] gmail [dot] com.

Best,

Leanne

Sunday, September 29, 2013

Cycles 2 - in progress

Cycles 2 - basting

Friday night and yesterday my cold/flu was back in some force so I stayed home from Sew Day with the EMQG. But in between naps and tea, I started cutting and making more circles. By last night, I was well along the way in my second planned selfish sewing project, a variation on my Cycles quilt. There it is during basting, just before I added the pins.

Cycles 2 - basting

I think the picture above is actually how it would hang on a wall, if you were hanging it. It is about 39" x 43", I did not want a square and I might trim the background once it is quilted. Oh and the pictures were after dark so the colours are close but not quite right. The fabrics are Kona solids and Essex linen, with the background being linen too.

Cycles 2 - quilting detail

I decided on more matchstick quilting, I love the effect. This is where I stopped last night, about 4" are quilted and I counted 40 lines done - and two bobbins worth of this 40 wt. Sulky variegated thread. The lines are purposely not even and a little wobbly, and I have to say it would be much easier to aim to get them even. However, I favour the modern industrial style of this.

Cycles 2 - back, quilting detail

I put a piece of Kona white on the back, it was handy. I debated a print but thought the better of it, I expect that this is a wall piece and no need to give up over a yard of anything pretty. I am pretty sure that I will have many moments of regret at this dense quilting but I expect that the ultimate effect will be striking. Oh and I set my stitch length to 4.

Cycles 2 - quilting in progress

Here is a photo from this morning, the colours are better but it is gray and raining here so the light inside is still not great. I pinned this more than I often pin and you can see how the dense quilting draws in the fabric and makes the wrinkles in the unquilted part. As I move the quilt in the machine, I use my hands to pull the upcoming part - top, batting and back - tight and wrinkle free, thus avoiding puckers and such in the quilted part. I can get a nice rhythm but it is not sewing at breakneck speed. I expect several more hours of this, I might have to find an audio book to listen to.

Making circles

Here are some of the circles, actually some of the better ones I now see.  They are not perfectly joined, I focused on having the centre seam as perfect as I could because that is where I think your eye is actually drawn. The imperfections will disappear in the quilting. The other thing I did was made the "L" shape background piece wider on both sides and then after making the DP (quarter circle) unit I trimmed them down. The quarter circles are 4" unfinished and so the circles finish with about a 6.75" diameter.

she can quilt

Tomorrow the link to link up your Q3 Finish - A - Long finishes opens, and you will have a week to get them up. And you can start thinking of your Q4 list, the things you hope to finish before years end. The link for the Q4 lists will open on October 8.

Enjoy your Sunday, I am going to be stitching lines I think.

Best,

Leanne

Wednesday, September 25, 2013

Wednesday - a WIP update

My Pickle Dish Quilt so far

I am going to miss the Wednesday WIP report next week as the FAL tutorial week will be running, so I thought I should do a quick update today. I have returned to the Pickle Dish Quilt, and I have now finished 178 of the 200 dish units. The end is in sight for them, but there are a lot of edges to piece and blocks to put together and centres to add. You will see more of this project over the next few months I expect.

My new sweater project

Yesterday I stayed home and slept a lot - the cold is retreating. In between, I swatched this lovely yarn - Acadia from The Fibre Company - and I have started Cria, which is a pretty sweater in Little Red in the City by Ysolda Teague. I have one of my two selfish sewing week projects started - even if it is knitting and not sewing.


Finished from last week's list:
  • I found a much better pattern and made Krista a much better hat. Pictures to come soon.
  • I finished recovering my ironing board cover (go here to see it, what a big improvement).
  • The pickle dishes are being made.
  • The end of Q3 of the FAL and the start of Q4 is organized and ready to roll.

Carrying forward from last week:
  • Placemats - high priority
  • Emerald chain quilt -  it is on my FAL list so it needs to be done now.
  • City Sampler -  I need to either start this or set it aside.
  • Finish the Nordika Giant Plus  and make a Giant Plus free pattern/tutorial.
  • Variation on Cycles (it is in my head, I doubt I can wait that long to make it)
  • Always Bee Learning blocks - fabric arrived yesterday
  • Mail to Di and to Shanna and Becky - This one is a priority, I cannot believe how easy it is for me to put off going to the post office.

It is sew day for my Modern Quilt Guild on Saturday, maybe I should take some of these projects along to do.


           WIP Wednesday at Freshly Pieced

I will link to Lee at Freshly Pieced and The Needle and Thread Network, see you there.

Best,

Leanne
p.s. Amazon links are part of the affiliate program.